Cisco 3800 Series Configuring - Page 12

Browse online or download pdf Configuring for Network Hardware Cisco 3800 Series. Cisco 3800 Series 32 pages. Password recovery procedure
Also for Cisco 3800 Series: Datasheet (8 pages), Application Note (41 pages), Troubleshooting Manual (15 pages), Datasheet (20 pages), Quick Start Manual (40 pages), User Manual (7 pages)

Print Page
Cisco 3800 Series Configuring
How to Configure Radio Settings on an Access Point
Command or Action
Step 4
dfs band frequency-group block
Example:
Router(config-if)# dfs band 1 2 block
Step 5
end
Example:
Router(config-if)# end
Step 6
show controllers dot11Radio interface
Example:
Router# show controllers dot11Radio 0/0/1
Step 7
copy running-config startup-config
Example:
Router# copy running-config startup-config
12
Configuring Radio Settings on an Access Point
Purpose
Prevents an access point from selecting a specific group of
frequencies during DFS.
•
The frequency-group value can be 1, 2, 3, or 4:
–
1 specifies frequencies 5.150 to 5.250 GHz.
–
2 specifies frequencies 5.250 to 5.350 GHz.
–
3 specifies frequencies 5.470 to 5.725 GHz.
4 specifies frequencies 5.725 to 5.825 GHz.
–
At least one group of frequencies must be specified.
•
Multiple groups are allowed.
Returns to privileged EXEC mode.
(Optional) Displays radio controller status.
The Current Frequency line of the output displays the
•
status of DFS, for example:
Current Frequency: 5300 MHz Channel 60 (DFS
enabled)
(Optional) Saves your entries in the configuration file.