Cisco ASA 5506W-X Mount The Chassis

Browse online or download pdf Mount The Chassis for Network Hardware Cisco ASA 5506W-X. Cisco ASA 5506W-X 10 pages. Threat defense reimage guide
Also for Cisco ASA 5506W-X: Quick Start Manual (10 pages), Configuration Manual (13 pages), Quick Start Manual (14 pages), Easy Setup Manual (11 pages), Software Manual (37 pages), Mount And Connect (12 pages), Installation Manual (46 pages)

Print Page
Cisco ASA 5506W-X Mount The Chassis
Mount the Chassis
Note
Do not remove the rubber feet included with the ASA because they are needed for proper cooling for all
mounting orientations.
•
•
•
•
Desktop-Mount the Chassis
You can mount the chassis on a desktop by placing it on a desk in a horizontal position. Make sure there are
no blockages or obstructions within one inch of the top of the chassis or within .5 inch of the sides and back,
so that nothing interferes with cooling. Do not remove the rubber feet included with the chassis. They are also
needed for proper cooling.
Caution
Do not stack the chassis on top of another chassis. If you stack the units, they will overheat, which causes the
units to power cycle.
Desktop-Mount the Chassis, on page 1
Wall-Mount the Chassis, on page 2
Rack-Mount the Chassis, on page 3
Install the ASA 5506H-X in a DIN Rail, on page 8
Mount the Chassis
1