Cisco ASA 5506W-X Het chassis monteren

Blader online of download pdf Het chassis monteren voor {categorie_naam} Cisco ASA 5506W-X. Cisco ASA 5506W-X 10 pagina's. Threat defense reimage guide
Ook voor Cisco ASA 5506W-X: Snelstarthandleiding (10 pagina's), Configuratiehandleiding (13 pagina's), Snelstarthandleiding (14 pagina's), Eenvoudige installatiehandleiding (11 pagina's), Software Handleiding (37 pagina's), Monteren en aansluiten (12 pagina's), Installatiehandleiding (46 pagina's)

Mount the Chassis

Note

Do not remove the rubber feet included with the ASA because they are needed for proper cooling for all

mounting orientations.

•

Desktop-Mount the Chassis

You can mount the chassis on a desktop by placing it on a desk in a horizontal position. Make sure there are

no blockages or obstructions within one inch of the top of the chassis or within .5 inch of the sides and back,

so that nothing interferes with cooling. Do not remove the rubber feet included with the chassis. They are also

needed for proper cooling.

Caution

Do not stack the chassis on top of another chassis. If you stack the units, they will overheat, which causes the

units to power cycle.

Desktop-Mount the Chassis, on page 1

Wall-Mount the Chassis, on page 2

Rack-Mount the Chassis, on page 3

Install the ASA 5506H-X in a DIN Rail, on page 8

Mount the Chassis