ACU-RITE Mill PWR G2 Software Update - Page 2

Browse online or download pdf Software Update for Music Mixer ACU-RITE Mill PWR G2. ACU-RITE Mill PWR G2 3 pages.
Also for ACU-RITE Mill PWR G2: Software Update (7 pages), Software Update (3 pages), Software Update (5 pages), Software Update (5 pages), Software Update (6 pages), Software Update (5 pages), Software Update (3 pages), Software Update (6 pages)

Print Page
ACU-RITE Mill PWR G2 Software Update
MILLPWR
G2
SOFTWARE
UPDATE
The Move Table menu key is now disabled when it should not be used. Previously, pressing it at
certain times, for example immediately after setting a new datum point, could cause unexpected
behavior such as table movement.
Persistent Jog Mode is now canceled when exiting Move Table.
Corrected an issue which prevented system messages and errors from being displayed on the
yellow status bar while the 'Machine Functions' menu was active.
Corrected an issue where the Ring step with a small side finish could have gouging on the
inside radius.
The Z-Axis starts .100" higher than the start "Z" value provided. MPII used .01" instead of .1".
Additional erroneous error were corrected