Cisco ATA 191 User Manual - Page 6

Browse online or download pdf User Manual for Network Hardware Cisco ATA 191. Cisco ATA 191 10 pages. Analog telephone adapter
Also for Cisco ATA 191: User Manual (30 pages), Administration Manual (4 pages), Get Started (8 pages), Manual (10 pages), Quick Start Manual (13 pages), Setup Manual (6 pages), User Manual (40 pages), User Manual (30 pages)

Print Page
Cisco ATA 191 User Manual

Install Your New ATA

Item
PHONE 2
ETHERNET (ATA 192 only)
NETWORK
DC 5V POWER
Install Your New ATA
Your ATA comes with everything to power it up, connect it to the network, and set it up on your desk.
Before You Begin
Before you begin the installation, make sure you have the following equipment:
• Ethernet cable to connect to your network.
• Analog phone or fax machine to connect to your ATA.
• Phone cable to connect your phone.
• Uninterruptible power supply (UPS) to provide backup power.
Procedure
Step 1
Connect the network cable to your network and to the NETWORK port on the ATA.
Step 2
Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine).
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
6
Description
Use an RJ-11 phone cable to connect a second analog phone or fax
machine.
Use an Ethernet cable to connect your ATA to a device on your network,
such as a computer.
Use an Ethernet cable to connect to the network.
Use the power adapter that was provided to connect to a power source.
Your ATA