Cisco ATA 191 사용자 설명서 - 페이지 6

{카테고리_이름} Cisco ATA 191에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 191 10 페이지. Analog telephone adapter
Cisco ATA 191에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 관리 매뉴얼 (4 페이지), 시작하기 (8 페이지), 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (13 페이지), 설정 매뉴얼 (6 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (30 페이지)

Install Your New ATA

Item

PHONE 2

ETHERNET (ATA 192 only)

NETWORK

DC 5V POWER

Install Your New ATA

Your ATA comes with everything to power it up, connect it to the network, and set it up on your desk.

Before You Begin

Before you begin the installation, make sure you have the following equipment:

• Ethernet cable to connect to your network.

• Analog phone or fax machine to connect to your ATA.

• Phone cable to connect your phone.

• Uninterruptible power supply (UPS) to provide backup power.

Procedure

Step 1

Connect the network cable to your network and to the NETWORK port on the ATA.

Step 2

Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine).

Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware

Description

Use an RJ-11 phone cable to connect a second analog phone or fax

machine.

Use an Ethernet cable to connect your ATA to a device on your network,

such as a computer.

Use an Ethernet cable to connect to the network.

Use the power adapter that was provided to connect to a power source.

Your ATA