Cisco RSP7000 Installing - Page 3

Browse online or download pdf Installing for Network Hardware Cisco RSP7000. Cisco RSP7000 26 pages. Upgrade kit in the cisco 7000 series routers
Also for Cisco RSP7000: Installation And Configuration Manual (48 pages)

Print Page

What Is the Cisco 7010?

The Cisco 7010 is a ﬁve-slot chassis, which uses the new RSP7000 (and the RSP7000CI), and

provides up to three interface processor slots that can accommodate the following CxBus-based

interface processors: Fast Ethernet, Ethernet, Token Ring, Fiber Distributed Data Interface (FDDI),

channel attachment, multichannel, serial, and so forth. The processor and interface processors are

keyed with guides on the backplane to prevent them from being fully inserted in the wrong slot.

Figure 2 shows the rear of the Cisco 7010 router with the RSP7000 and RSP7000CI installed. In the

Cisco 7010, slots 3 and 4 are reserved for the RSP7000, which contains the system processor and

performs packet switching functions, and the RSP7000CI board, which contains all of the

environmental monitoring functions for the Cisco 7010. The remaining three slots (slots 0 through

2) are for interface processors.

Figure 2

Power switch

Chassis ground

Cisco 7010 with RSP7000 and RSP7000CI Installed

screw

Power receptacle

AC-input power supply

Installing the RSP7000 Upgrade Kit in the Cisco 7000 Series Routers

Product Overview

RSP7000CI slot 4

RSP7000 slot 3

Interface processor slot 2

Interface processor slot 1

Interface processor slot 0

DC OK LED