Cisco RSP7000 Встановлення - Сторінка 3
Переглянути онлайн або завантажити pdf Встановлення для Мережеве обладнання Cisco RSP7000. Cisco RSP7000 26 сторінок. Upgrade kit in the cisco 7000 series routers
Також для Cisco RSP7000: Посібник з встановлення та налаштування (48 сторінок)
Друкувати сторінкуWhat Is the Cisco 7010?
The Cisco 7010 is a five-slot chassis, which uses the new RSP7000 (and the RSP7000CI), and
provides up to three interface processor slots that can accommodate the following CxBus-based
interface processors: Fast Ethernet, Ethernet, Token Ring, Fiber Distributed Data Interface (FDDI),
channel attachment, multichannel, serial, and so forth. The processor and interface processors are
keyed with guides on the backplane to prevent them from being fully inserted in the wrong slot.
Figure 2 shows the rear of the Cisco 7010 router with the RSP7000 and RSP7000CI installed. In the
Cisco 7010, slots 3 and 4 are reserved for the RSP7000, which contains the system processor and
performs packet switching functions, and the RSP7000CI board, which contains all of the
environmental monitoring functions for the Cisco 7010. The remaining three slots (slots 0 through
2) are for interface processors.
Figure 2
Power switch
Chassis ground
Cisco 7010 with RSP7000 and RSP7000CI Installed
screw
Power receptacle
AC-input power supply
Installing the RSP7000 Upgrade Kit in the Cisco 7000 Series Routers
Product Overview
RSP7000CI slot 4
RSP7000 slot 3
Interface processor slot 2
Interface processor slot 1
Interface processor slot 0
DC OK LED
3