Cisco SCE 1000 and Quick Start Manual - Page 46

Browse online or download pdf Quick Start Manual for Network Hardware Cisco SCE 1000 and. Cisco SCE 1000 and 49 pages. Service control engine 1000 2xgbe

Print Page
Cisco SCE 1000 and Quick Start Manual
• Troubleshooting the link interface subsystem:
show interface GigabitEthernet 0/# — Displays information for a specific GBE Interface.
–
Following is a sample output from the show interface command.
ip address: 10.1.6.145
subnet mask: 255.255.0.0
Configured duplex: auto
AutoNegotiation is On, link is Up, actual duplex: half
show interface GigabitEthernet 0/# counters — Displays the values of counters of a GBE interface.
–
Following is a sample output from the show interface counters command.
In total octets: 191520
In good unicast packets: 560
In good multicast packets: 0
In good broadcast packets: 0
In packets discarded: 0
In packets with CRC/Alignment error: 0
In undersized packets: 0
In oversized packets: 0
Out total octets: 0
Out unicast packets: 0
Out non unicast packets: 0
Out packets discarded: 0
Refer to The User Log for an explanation of commands related to the user log.
46