Cisco SPA525G - Small Business Pro IP Phone VoIP User Manual - Page 15

Browse online or download pdf User Manual for Network Hardware Cisco SPA525G - Small Business Pro IP Phone VoIP. Cisco SPA525G - Small Business Pro IP Phone VoIP 18 pages. Vpn status
Also for Cisco SPA525G - Small Business Pro IP Phone VoIP: Quick Start Manual (2 pages), Setup And User Manual (19 pages), User Manual (22 pages), Quick Reference Manual (4 pages), Quick Start Manual (14 pages), Quick Start Manual (5 pages), Manual (9 pages), Instructions (4 pages), Quick Start Manual (5 pages), Quick Reference Card (2 pages), Quick Start Manual (8 pages), Quick Reference Manual (4 pages), User Manual (2 pages), Quick Start Manual (3 pages), Quick Start Manual (3 pages), Quick Start Manual (3 pages), Quick Start Manual (4 pages), Manual (3 pages), Manual (3 pages), User Manual (7 pages), Using (2 pages), Instructions (4 pages), Quick Start Manual (2 pages), User Manual (50 pages)

Print Page

4.2.3.1

DHCP

1. Configure DHCP

Make sure your DHCP router is configured to use option 66 to automatically

instruct phones with the URL for auto provisioning. For more information refer to

your router documentation or contact your network administrator.

2. Phone first boot or user initiated reboot

Auto provisioning process will start during phone first boot or after reboot process has

been initiated by user. DHCP server will instruct the phone where from to pickup

appropriate configuration file. If everything is done as above described, you should

have successfully registered your phone to PBXware. Dial *123 to verify registration.

TFTP or HTTP & HTTPS

4.2.3.2

1. Login to phone web administration interface

If there is no DHCP in your network, you can still auto provision your Cisco SPA phone.

Please refer to your Cisco SPA phone model User Guide for instruction about setting

static IP address. After you configure your Cisco SPA phone to use a static IP address,

continue with the following steps.

Open a new browser window and enter your phone IP address in order to access

the phone web administration interface login screen. Example:

http://192.168.1.22

Please note, factory default login details are username: admin and password:

admin.

Click on Admin Login and then on Advanced.

Click on Provisioning tab.

You can use TFTP or HTTP & HTTPS protocols in order to Auto Provision your

Cisco SPA phone.

Choose which protocol you want to use:

TFTP

HTTP & HTTPS

4.2.3.2.1 TFTP

In the Profile Rule field enter tftp:// followed by Hostname or IP Address,

followed then by /$MA.cfg.

Registering Phone