Cisco SPA525G - Small Business Pro IP Phone VoIP User Manual - Page 35

Browse online or download pdf User Manual for Network Hardware Cisco SPA525G - Small Business Pro IP Phone VoIP. Cisco SPA525G - Small Business Pro IP Phone VoIP 50 pages. Vpn status
Also for Cisco SPA525G - Small Business Pro IP Phone VoIP: User Manual (18 pages), Quick Start Manual (2 pages), Setup And User Manual (19 pages), User Manual (22 pages), Quick Reference Manual (4 pages), Quick Start Manual (14 pages), Quick Start Manual (5 pages), Manual (9 pages), Instructions (4 pages), Quick Start Manual (5 pages), Quick Reference Card (2 pages), Quick Start Manual (8 pages), Quick Reference Manual (4 pages), User Manual (2 pages), Quick Start Manual (3 pages), Quick Start Manual (3 pages), Quick Start Manual (3 pages), Quick Start Manual (4 pages), Manual (3 pages), Manual (3 pages), User Manual (7 pages), Using (2 pages), Instructions (4 pages), Quick Start Manual (2 pages)

Print Page

Installing Your Phone

Connecting Your Phone to the Computer Network

STEP 1

STEP 2

STEP 3

Cisco Small Business Pro SPA IP Phone 525G (SIP) User Guide

The Cisco SPA 525G phone supports a direct connection to the wireless network.

Before setting up the wireless network, you need to know the wireless security

type for your router. The SPA525G works with the following security types:

•

WEP—Wired Equivalent Privacy. With this type of security, you need to

enter a 64 or 128-bit key on the phone (or a more easily remembered

passphrase to generate the key). The phone then authenticates with your

router to provide a secure connection.

•

WPA—Wi-Fi Protected Access. The SPA525G supports WPA PSK, WPA2

PSK, WPA Enterprise, and WPA2 Enterprise. With this type of security, you

will at the very minimum be required to enter a password on the phone. The

phone then authenticates with your router to provide a secure connection.

Determining Your Wireless Router Security Type

If you do not know your wireless router security type, you need to log in to the

router interface to get this information. The steps below are written for a Linksys

router, but procedures for other routers should be similar.

must be connected to your wireless network. Enter the IP address of the wireless

router in the browser toolbar.

If required, enter the user name and password. (By default, Linksys routers

typically use "admin" for the user name and "admin" for the password.)

View the Wireless tab or screen. Note the network name (SSID) and the type of

security (WEP, WPA Personal, or WPA2 Personal).

If your router is using WEP, note the following:

•

WEP encryption: 64 bit or 128 bit. You need to choose this later.

•

Default transmit key, or TX key: The default key (of the 4) that the router

transmits to authenticate. This value will be 1, 2, 3, or 4.

•

Passphrase and keys: You choose one of two methods to enter the WEP

key. You either directly enter the WEP key, or enter a more simple

passphrase to generate the WEP key.