Cisco AS5300 - Universal Access Server Configuration Manual - Page 8
Browse online or download pdf Configuration Manual for Server Cisco AS5300 - Universal Access Server. Cisco AS5300 - Universal Access Server 46 pages. Access server
Also for Cisco AS5300 - Universal Access Server: Appendix (10 pages), Quick Start Manual (25 pages), Manual (21 pages)
Print Page
Task 2—Setting Up Asynchronous Shell Services
Enter the show running command to view the current configuration of the AAA parameters:
Step 3
Task 2—Setting Up Asynchronous Shell Services
When you have configured the preliminary parameters such as your host name, password, timestamps
and local AAA security on the Cisco AS5300, you can then move on to setting up the asynchronous
shell services, which provide access through the Cisco IOS CLI EXEC shell to terminal services (no
PPP) for the following tasks:
•
•
•
•
Step 1—Configuring the Fast Ethernet 100BaseT Interface
Assign an IP address, line speed, and duplex mode to the Cisco AS5300's Fast Ethernet interface, which
supports 10- and 100-Mbps speeds.
The default priority search order for autonegotiating the line speed is as follows:
1.
2.
3.
4.
To configure the Fast Ethernet 100Base-TX interface, enter the following commands beginning in
global configuration mode:
Cisco IOS Dial Services Quick Configuration Guide
2-8
hq-sanjose# show running
Building configuration...
Current configuration:
!
version 12.0(5)
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname hq-sanjose
!
aaa new-model
aaa authentication login default local
aaa authentication ppp default if-needed local
enable secret 5 $1$.voA$9/8.Zoil3jeWJMP6hEE6U0
!
username joe-admin password 7 <removed>
!
----- snip ----
Changing passwords
Accessing menus
Troubleshooting modem connections
Accessing other network resources with Telnet
100Base-TX full duplex
100Base-TX half duplex
10Base-T full duplex
10Base-T half duplex
Chapter 2
Configuring the Cisco AS5300 Network Access Server