Cisco AS5300 - Universal Access Server 구성 매뉴얼 - 페이지 8
{카테고리_이름} Cisco AS5300 - Universal Access Server에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5300 - Universal Access Server 46 페이지. Access server
Cisco AS5300 - Universal Access Server에 대해서도 마찬가지입니다: 부록 (10 페이지), 빠른 시작 매뉴얼 (25 페이지), 매뉴얼 (21 페이지)
페이지 인쇄
Task 2—Setting Up Asynchronous Shell Services
Enter the show running command to view the current configuration of the AAA parameters:
Step 3
Task 2—Setting Up Asynchronous Shell Services
When you have configured the preliminary parameters such as your host name, password, timestamps
and local AAA security on the Cisco AS5300, you can then move on to setting up the asynchronous
shell services, which provide access through the Cisco IOS CLI EXEC shell to terminal services (no
PPP) for the following tasks:
•
•
•
•
Step 1—Configuring the Fast Ethernet 100BaseT Interface
Assign an IP address, line speed, and duplex mode to the Cisco AS5300's Fast Ethernet interface, which
supports 10- and 100-Mbps speeds.
The default priority search order for autonegotiating the line speed is as follows:
1.
2.
3.
4.
To configure the Fast Ethernet 100Base-TX interface, enter the following commands beginning in
global configuration mode:
Cisco IOS Dial Services Quick Configuration Guide
2-8
hq-sanjose# show running
Building configuration...
Current configuration:
!
version 12.0(5)
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname hq-sanjose
!
aaa new-model
aaa authentication login default local
aaa authentication ppp default if-needed local
enable secret 5 $1$.voA$9/8.Zoil3jeWJMP6hEE6U0
!
username joe-admin password 7 <removed>
!
----- snip ----
Changing passwords
Accessing menus
Troubleshooting modem connections
Accessing other network resources with Telnet
100Base-TX full duplex
100Base-TX half duplex
10Base-T full duplex
10Base-T half duplex
Chapter 2
Configuring the Cisco AS5300 Network Access Server