Cisco S695F Manual - Page 15

Browse online or download pdf Manual for Server Cisco S695F. Cisco S695F 24 pages. Web security appliance
Also for Cisco S695F: Getting Started Manual (18 pages), Hardware Installation Manual (50 pages)

Print Page

Overview

Power Supply

The power supply is hot-swappable. For the C195, you can order a second power supply for redundancy as

1+1. The C395, C695, and C695F ship with two power supplies thus providing for redundancy.

Note

Make sure that one power supply is always active.

The following table lists the specifications for the 770-W AC power supply (Cisco part number 341-0591-04)

used in the .

Table 2: 770-W Power Supply Specifications

Description

AC input voltage range

AC input frequency

Maximum AC input current

Maximum input volt amperes

Maximum output power for each power supply

Maximum inrush current

Maximum hold-up time

Rear unit identification:

• Off—The unit identification function is not

in use.

• Blue, flashing—The unit identification

function is activated.

Power supply:

• Off—No AC input (12-V main power off;

12-V standby power off)

• Green, flashing—12-V main power off; 12-V

standby power on.

• Green—12-V main power on; 12-V standby

power on.

• Amber, flashing—Warning threshold

detected but 12-V main power on.

• Amber—Critical error detected; 12-V main

power off ( for example, overcurrent,

overvoltage, or overtemperature failure).

Specification

Nominal range: 100 to 120 V AC, 200 to 240 V AC

Range: 90–132 V AC, 180–264 V AC

Nominal range: 50–60 Hz

Range: 47–63 Hz

9.5 A peak at 100-V AC

4.5 A peak at 208 V AC

950 VA at 100 V AC

770 W

15 A (subcycle duration)

12 ms at 770 W

Power Supply

Overview