Cisco UCS 250 Setup - Page 5

Browse online or download pdf Setup for Server Cisco UCS 250. Cisco UCS 250 10 pages.

Print Page

Power Up the KVM

Complete these steps in order to power up the server:

Plug the power cord into the chassis.

Note:

♦

CIMC initializes system standby (Power Off mode).

♦

CIMC is active and can be controlled through GUI or CLI, if you know the IP address.

Depress Front Panel Power:

♦

The Fans begins to spin up.

♦

Then POST sequence begins.

♦

At this point you can either boot up or begin the installation process.

♦

Note that for large memory, models can display a blank screen for several minutes.

♦

For C−250If you immediately depress the power switch, you interrupt the CIMC

initialization.