Cisco UCS C Series Setup - Page 5
Browse online or download pdf Setup for Server Cisco UCS C Series. Cisco UCS C Series 10 pages. Security manager 4.3
Also for Cisco UCS C Series: Troubleshooting Tips (11 pages), Upgrade Manual (11 pages), Upgrade Manual (10 pages), Quick Start Manual (12 pages), Installing Manual (19 pages)
Print Page
Power Up the KVM
Complete these steps in order to power up the server:
1.
Plug the power cord into the chassis.
Note:
♦
CIMC initializes system standby (Power Off mode).
♦
CIMC is active and can be controlled through GUI or CLI, if you know the IP address.
2.
Depress Front Panel Power:
♦
The Fans begins to spin up.
♦
Then POST sequence begins.
♦
At this point you can either boot up or begin the installation process.
♦
Note that for large memory, models can display a blank screen for several minutes.
♦
For C−250If you immediately depress the power switch, you interrupt the CIMC
initialization.