Cisco UCS E Series Installation Manual - Page 41

Browse online or download pdf Installation Manual for Server Cisco UCS E Series. Cisco UCS E Series 46 pages. Ucs e series unified computing system
Also for Cisco UCS E Series: Product Overview (8 pages), Troubleshooting Manual (28 pages)

Print Page

Pull the latches away from the DIMM at both ends to lift the DIMM slightly.

Step 4

Caution

Take care not to dislodge the battery that is adjacent to the DIMM connectors.

Step 5

Pull the DIMM out of the socket as shown in the following figure.

Figure 20

Place the DIMM in an antistatic bag to protect it from ESD damage.

Step 6

Installing the Memory DIMM

For information about the memory on the router, see the appropriate router documentation. For

information about the memory on the E-Series Server, see the requirements of the installed operating

system.

Note

The single-wide E-Series Servers support up to 16 GB of DDR3 memory DIMMs.

The double-wide E-Series Servers support up to 48 GB of DDR3 memory DIMMs.

Performance degradation can occur if you use the following memory configuration:

•

OL-26447-03

Removing the Memory DIMM

Mix DIMM sizes and densities within a channel.

Partially populate a channel.

Unevenly populate the DIMMs between CPUs.

Installing and Replacing the Memory DIMMS

Hardware Installation Guide for Cisco UCS E-Series Servers