Cisco UCS E Series Руководство по установке - Страница 41
Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Cisco UCS E Series. Cisco UCS E Series 46 страниц. Ucs e series unified computing system
Также для Cisco UCS E Series: Обзор продукции (8 страниц), Руководство по устранению неполадок (28 страниц)
Печатать страницу
Pull the latches away from the DIMM at both ends to lift the DIMM slightly.
Step 4
Caution
Take care not to dislodge the battery that is adjacent to the DIMM connectors.
Step 5
Pull the DIMM out of the socket as shown in the following figure.
Figure 20
Place the DIMM in an antistatic bag to protect it from ESD damage.
Step 6
Installing the Memory DIMM
For information about the memory on the router, see the appropriate router documentation. For
information about the memory on the E-Series Server, see the requirements of the installed operating
system.
Note
The single-wide E-Series Servers support up to 16 GB of DDR3 memory DIMMs.
The double-wide E-Series Servers support up to 48 GB of DDR3 memory DIMMs.
Performance degradation can occur if you use the following memory configuration:
•
•
•
OL-26447-03
Removing the Memory DIMM
Mix DIMM sizes and densities within a channel.
Partially populate a channel.
Unevenly populate the DIMMs between CPUs.
Installing and Replacing the Memory DIMMS
Hardware Installation Guide for Cisco UCS E-Series Servers
41