Cisco UCS E Series Troubleshooting Manual - Page 5

Browse online or download pdf Troubleshooting Manual for Server Cisco UCS E Series. Cisco UCS E Series 28 pages. Ucs e series unified computing system
Also for Cisco UCS E Series: Product Overview (8 pages), Installation Manual (46 pages)

Print Page

Cisco UCS E Series Troubleshooting Manual

Overview

Cannot Configure Power Restore Policy on ISR 4K Platforms

Due to hardware differences between the ISR G2 and ISR 4K platforms, the BIOS setting for Power Restore

Policy is not applicable on ISR 4K platforms. Instead, the CIMC automatically enacts a "Restore Last State"

policy on ISR 4K.

Note

On ISR 4K platforms, Power Restore Policy settings will be configurable in CIMC beginning with the

Release 3.1.3. On ISR G2 platforms, Power Restore Policy settings are still configured through the BIOS

settings in CIMC.

Boot Order Configuration is not Saved after a Server Reboot

Make sure that you configure boot order through the CIMC, and save the changes ("commit" in CLI or "save

changes" in GUI). Do not configure boot order through the BIOS setup (<F2>) menu. If you configure boot

order through the BIOS setup, the CIMC configuration will overwrite the boot order configuration.

Recovering From a Corrupted CIMC Firmware Image

See the "Troubleshooting E-Series Server or NCE Access Issues" section in the "Firmware Management"

chapter in the

Compute Engine, Release 2.x

Recovering From a Faulty SD Drive

See the "Troubleshooting E-Series Server or NCE Access Issues" section in the "Firmware Management"

chapter in the

Compute Engine, Release

Recovering From a Corrupted File System

See the "Troubleshooting E-Series Server or NCE Access Issues" section in the "Firmware Management"

chapter in the

Compute Engine, Release

Verifying and Upgrading to the Latest Firmware Image

Use the Cisco Host Upgrade Utility to verify and upgrade to the latest firmware image. See the

Utility Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute

VMware License Troubleshooting

Cannot Apply VMware FL-SRE-V-HOST License

This problem occurs if you are using more than 32 GB of RAM with VMware vSphere Hypervisor

To resolve this problem, reduce the RAM to 32 GB or less, or upgrade your license to FL-SRE-V-HOSTVC.

CLI Configuration Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network

2.x.

CLI Configuration Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network

2.x.

Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine

VMware License Troubleshooting

Host Upgrade

Engine.

™

5.x.