Cisco UCS E Series Manual de resolução de problemas - Página 5
Procurar online ou descarregar pdf Manual de resolução de problemas para Servidor Cisco UCS E Series. Cisco UCS E Series 28 páginas. Ucs e series unified computing system
Também para Cisco UCS E Series: Visão geral do produto (8 páginas), Manual de instalação (46 páginas)
Imprimir página
Overview
Cannot Configure Power Restore Policy on ISR 4K Platforms
Due to hardware differences between the ISR G2 and ISR 4K platforms, the BIOS setting for Power Restore
Policy is not applicable on ISR 4K platforms. Instead, the CIMC automatically enacts a "Restore Last State"
policy on ISR 4K.
Note
On ISR 4K platforms, Power Restore Policy settings will be configurable in CIMC beginning with the
Release 3.1.3. On ISR G2 platforms, Power Restore Policy settings are still configured through the BIOS
settings in CIMC.
Boot Order Configuration is not Saved after a Server Reboot
Make sure that you configure boot order through the CIMC, and save the changes ("commit" in CLI or "save
changes" in GUI). Do not configure boot order through the BIOS setup (<F2>) menu. If you configure boot
order through the BIOS setup, the CIMC configuration will overwrite the boot order configuration.
Recovering From a Corrupted CIMC Firmware Image
See the "Troubleshooting E-Series Server or NCE Access Issues" section in the "Firmware Management"
chapter in the
Compute Engine, Release 2.x
Recovering From a Faulty SD Drive
See the "Troubleshooting E-Series Server or NCE Access Issues" section in the "Firmware Management"
chapter in the
Compute Engine, Release
Recovering From a Corrupted File System
See the "Troubleshooting E-Series Server or NCE Access Issues" section in the "Firmware Management"
chapter in the
Compute Engine, Release
Verifying and Upgrading to the Latest Firmware Image
Use the Cisco Host Upgrade Utility to verify and upgrade to the latest firmware image. See the
Utility Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute
VMware License Troubleshooting
Cannot Apply VMware FL-SRE-V-HOST License
This problem occurs if you are using more than 32 GB of RAM with VMware vSphere Hypervisor
To resolve this problem, reduce the RAM to 32 GB or less, or upgrade your license to FL-SRE-V-HOSTVC.
CLI Configuration Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network
.
CLI Configuration Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network
2.x.
CLI Configuration Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network
2.x.
Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine
VMware License Troubleshooting
Host Upgrade
Engine.
™
5.x.
5