Cisco 3600 Series Configuration Note - Page 2

Browse online or download pdf Configuration Note for Gateway Cisco 3600 Series. Cisco 3600 Series 23 pages. Memory upgrade
Also for Cisco 3600 Series: Product Overview (10 pages), Upgrade Instructions (30 pages), Owner's Manual (17 pages), Application Note (41 pages), Configuration Manual (36 pages), User Manual (25 pages), Appendix (15 pages), User Manual (7 pages), Manual (5 pages), Configuration Note (18 pages), Configuration Note (25 pages)

Print Page

•

Warning

equipment. (To see translated versions of this warning, refer to the Regulatory Compliance and

Safety Information document that accompanied the router.)

Warning

AC units; disconnect the power at the circuit breaker on DC units. (To see translated versions of this

warning, refer to the Regulatory Compliance and Safety Information document that accompanied the

router.)

Warning

power cord. (To see translated versions of this warning, refer to the Regulatory Compliance and

Safety Information document that accompanied the router.)

The following warning applies to routers with a DC power supply:

Warning

the DC circuit. To ensure that all power is OFF, locate the circuit breaker on the panel board that

services the DC circuit, switch the circuit breaker to the OFF position, and tape the switch handle of

the circuit breaker in the OFF position. (To see translated versions of this warning, refer to the

Regulatory Compliance and Safety Information document that accompanied the router.)

Warning

regulations. (To see translated versions of this warning, refer to the Regulatory Compliance and

Safety Information document that accompanied the router.)

Caution

have discharged all static electricity from your body before opening the chassis. Before performing

procedures described in this document, review the next section, "Safety Recommendations."

2 Cisco 3600 Series Power Supply Conﬁguration Note

Replacing the Cover, page 16

Replacing Connections to the Router, page 17

Troubleshooting, page 20

Obtaining Service and Support, page 20

Cisco Connection Online, page 20

Only trained and qualiﬁed personnel should be allowed to install or replace this

Before working on a chassis or working near power supplies, unplug the power cord on

Before working on a system that has an on/off switch, turn OFF the power and unplug the

Before performing any of the following procedures, ensure that power is removed from

Ultimate disposal of this product should be handled according to all national laws and

To avoid damaging electrostatic discharge (ESD)-sensitive components, ensure that you