Cisco AT&T 3G MicroCell Getting Started Manual - Page 4
Browse online or download pdf Getting Started Manual for Gateway Cisco AT&T 3G MicroCell. Cisco AT&T 3G MicroCell 11 pages. Wireless signal booster
Also for Cisco AT&T 3G MicroCell: User Manual (20 pages), User Manual (20 pages), Quick Start Manual (8 pages)
Print Page
Option A
AT&T 3G MicroCell™
Note: Since you have a gateway or Wi-Fi router, you will NOT need to plug anything into the black port labeled 'Computer' on the 3G
Remove the sticker that covers the rear panel of your 3G MicroCell.
To ensure success, it is important to complete the steps below in order.
1. Take the
yellow Ethernet cable
'Ethernet'
on the 3G MicroCell.
2. Connect the other end of the
3. First,
turn o power
in the following order:
a) Gateway or Modem
b) Wi-Fi Router (if you have one)
c) 3G MicroCell (
Do this last
the 3G MicroCell and connect the other end to an
4
High Speed Internet with Gateway or Modem and Wi-Fi Router
Ethernet Cable
1
3
Power
Connect AC power adapter
that came with the 3G MicroCell and connect one end to the yellow
yellow Ethernet cable
to your current internet equipment.
– connect one end of the
(Included)
2
last .
to any open
Ethernet port on your gateway or Wi-Fi router
Wait 1 minute
, then
AC Power Adapter
AC outlet
.)
Gateway or Wi-Fi Router
Open Ports
turn on power
to your Internet equipment
to the port labeled
'Power'
Advance to page 6.
MicroCell.
port labeled
.
on