Cisco ATA 186 Configuration - Page 17

Browse online or download pdf Configuration for Gateway Cisco ATA 186. Cisco ATA 186 28 pages. Analog telephone adaptor
Also for Cisco ATA 186: Datasheet (7 pages), Overview (11 pages), Overview Manual (11 pages), Configuration Manual (8 pages), User Manual (12 pages), Installation And Configuration Manual (13 pages), Instructions For Installing (6 pages), Configuration (6 pages)

Print Page

Do not connect the Phone input ports to a

Caution

telephone wall jack. To avoid damaging the

Cisco ATA or telephone wiring in the building, do

not connect the Cisco ATA to the

telecommunications network. Connect the Phone

port to a telephone only, never to a telephone wall

jack.

The telephone must be switched to tone setting (not

Note

pulse) for the Cisco ATA to operate properly.

(Optional) Connect the telephone line cord of a second

Step 3

telephone to the Phone 2 input port.

If you are connecting only one telephone to the

Note

Cisco ATA, you must use the Phone 1 input port.

Connect an Ethernet cable to the uplink RJ-45

Step 4

connector on the Cisco ATA. For the Cisco ATA 186,

this is the 10BASE-T connector; for the Cisco ATA 188,

this is the 10/100UPLINK connector.