Cisco VG202 Hardware Installation Manual - Page 33
Browse online or download pdf Hardware Installation Manual for Gateway Cisco VG202. Cisco VG202 50 pages. Voice gateways
Also for Cisco VG202: Software Configuration Manual (50 pages), Manual (10 pages), Hardware Installation Manual (48 pages), Quick Start Manual (19 pages)
Print Page
Chapter 3
Installing Cisco VG202 and Cisco VG204 Voice Gateways
•
•
•
Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when
installing or configuring your system, contact a customer service representative. (See the
Documentation and Submitting a Service Request" section on page
Wall-Mounting the Chassis
The following warning applies only when the unit is wall-mounted:
This unit is intended to be mounted on a wall. Please read the wall-mounting instructions carefully
Warning
before beginning installation. Failure to use the correct hardware or to follow the correct procedures
could result in a hazardous situation to people and damage to the system. Statement 248
You can mount the voice gateway on a wall or other vertical surface by using the molded
mounting-screw slots on the bottom of the voice gateway and two number-six, 3/4 inch (M3.5 x 20 mm)
screws. You must provide the screws.
Figure 3-2
2
1
The following conditions must be met when you mount the voice gateway:
•
•
OL-15959-01
Power cord, 6 feet (1.8-meters long)
RJ-45-to-DB-25 adapter cable (labeled Console)
Grounding lug and fasteners
Mounting-Screw Slots for Wall-Mounting a VG202 or VG204 Voice Gateway
1
1
2
Rubber feet
Because you will use the LEDs as status and problem indicators, the LEDs on the front panel must
face upward and must be easily visible.
The back panel must face downward to reduce strain on the cable connections.
Figure 3-2
shows the mounting-screw slots.
1
2
1
Mounting-screw slots
Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide
Wall-Mounting the Chassis
"Obtaining
xvi.)
3-5