Cisco VG202 Panduan Pemasangan Perangkat Keras - Halaman 33

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Gerbang Cisco VG202. Cisco VG202 50 halaman. Voice gateways
Juga untuk Cisco VG202: Panduan Konfigurasi Perangkat Lunak (50 halaman), Manual (10 halaman), Panduan Pemasangan Perangkat Keras (48 halaman), Panduan Memulai Cepat (19 halaman)

Chapter 3

Installing Cisco VG202 and Cisco VG204 Voice Gateways

•

Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when

installing or configuring your system, contact a customer service representative. (See the

Documentation and Submitting a Service Request" section on page

Wall-Mounting the Chassis

The following warning applies only when the unit is wall-mounted:

This unit is intended to be mounted on a wall. Please read the wall-mounting instructions carefully

Warning

before beginning installation. Failure to use the correct hardware or to follow the correct procedures

could result in a hazardous situation to people and damage to the system. Statement 248

You can mount the voice gateway on a wall or other vertical surface by using the molded

mounting-screw slots on the bottom of the voice gateway and two number-six, 3/4 inch (M3.5 x 20 mm)

screws. You must provide the screws.

Figure 3-2

The following conditions must be met when you mount the voice gateway:

•

OL-15959-01

Power cord, 6 feet (1.8-meters long)

RJ-45-to-DB-25 adapter cable (labeled Console)

Grounding lug and fasteners

Mounting-Screw Slots for Wall-Mounting a VG202 or VG204 Voice Gateway

Rubber feet

Because you will use the LEDs as status and problem indicators, the LEDs on the front panel must

face upward and must be easily visible.

The back panel must face downward to reduce strain on the cable connections.

Figure 3-2

shows the mounting-screw slots.

Mounting-screw slots

Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide

"Obtaining

xvi.)

3-5