Cisco VG202 Panduan Pemasangan Perangkat Keras - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Gerbang Cisco VG202. Cisco VG202 50 halaman. Voice gateways
Juga untuk Cisco VG202: Panduan Konfigurasi Perangkat Lunak (50 halaman), Manual (10 halaman), Panduan Pemasangan Perangkat Keras (48 halaman), Panduan Memulai Cepat (19 halaman)

Wall-Mounting the Chassis

The power supply must rest on a horizontal surface such as the floor or a table. If the power supply

•

is not supported, it could place strain on the power supply cable and cause it to disconnect from the

connector on the voice gateway back panel.

To wall-mount a Cisco VG202 or VG204 voice gateway, follow these steps:

Secure two screws 5 7/16 inches (13.81 centimeters) apart into a wall and 5/32 inch (0.40 centimeter)

Step 1

from the wall.

Hang the voice gateway on the screws as shown in

Step 2

Place the power supply on a horizontal surface.

Step 3

Figure 3-3

Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide

3-6

Mounting the VG202 or VG204 Voice Gateway on a Wall

Chapter 3

Installing Cisco VG202 and Cisco VG204 Voice Gateways

Figure

3-3.

OL-15959-01