Epson Stylus CX6000 Series Manual - Page 5

Browse online or download pdf Manual for Scanner Epson Stylus CX6000 Series. Epson Stylus CX6000 Series 19 pages. Ink cartridge for use with stylus cx5000; cx6000; cx7400; cx8400; cx9400f; cx9475f printers;
Also for Epson Stylus CX6000 Series: Start Here Manual (8 pages), Update (1 pages), Manual (4 pages)

Print Page

4. Insert the paper, printable side up, against the right edge

guide and beneath the tabs. (The printed side is whiter or

brighter on some papers.) Always load paper short edge first,

even for landscape printing.

Place paper beneath the tabs

You can load up to 100 sheets of plain paper and up to

20 sheets of photo or matte paper. (See page 6 for capacity

guidelines on other paper types.)

Note:

The type of paper you choose affects the way your printout

looks, so be sure to select the correct paper for your job. If you

are just making a copy or printing a rough draft of an image, plain

paper is fine. However, for the best results, you'll want to use

one of Epson's special ink jet papers designed for your printer.

For example, your photos will look great printed on Epson Ultra

Premium Photo Paper Glossy (see page 1 for more information).

5. Slide the left edge guide against the left edge of the paper

(but not too tightly).

6. Flip the feeder guard back.

Follow these guidelines when loading paper:

❏ Don't load paper above the arrow on the left edge guide.

Make sure the paper is under the tabs on the left and right

edge guides.

❏ Load the printable side face-up. It's often brighter or whiter

than the other side.

❏ Always load the short edge first, even when printing in

landscape mode.

❏ Load letterhead or preprinted paper into the printer top

edge first.

❏ If you experience paper feeding problems, try loading fewer

sheets.

❏ If you're using special paper, check the package for special

loading instructions.

Envelopes

1. Open the paper support and slide out the extensions.

2. Open the output tray and pull out the extension.

3. Set the paper thickness lever to the ^

6/06

Epson Stylus CX6000 Series

position.