Argos Portabase Assembly Instructions - Page 3

Browse online or download pdf Assembly Instructions for Indoor Furnishing Argos Portabase. Argos Portabase 4 pages.

Print Page

Assembly: Only for OSB Floor

Step 1

Identify the 2 long beams

and 2 shorter beams.

On a level surface create

the required layout, as

shown. Secure the shorter

beams in place using 2x

100mm screws as shown in

the diagram.

Step 2

the top of the frame and

measure out where the

beams meet the frame.

Once all markings have

been made remove the

Step 3

Line up short beams with

markings and attach in place

using 2x100mm screws as

shown in the diagram.

Short beams should be

evenly spaced.

*Important, for the 10x6 please leave

two of the short beams aside for addition

at a later stage.

Step 4

With the portbase in the

desired position for the

L shaped feet to the inside of

the portbase framework using

3x40mm round head screws

pre-drilling with a 2mm drill bit.

Ensure that the base is level. Either of

Step 5

To secure the base to the

ground, hammer in the spikes

at each corner untill level with

the top of the base, using a

piece of scrap wood to

prevent damage to the spike.

Step 6

Once the Spike is in the desired

round head screws as shown. Pre-drill

using a 2mm drill bit.

Pre-Drill with

2mm bit

Pre-Drill with

2mm bit