TomTom RIDER Manual - Page 2

Browse online or download pdf Manual for GPS TomTom RIDER. TomTom RIDER 4 pages. How to pair 2nd edition to a schuberth src communication system
Also for TomTom RIDER: Install Manual (1 pages), Manual (44 pages)

Print Page

Later on Scala switched to supplying Schuberth with very similar looking SRC collar systems but they

actually contain a modified version of their Q series headset software – These can be identified by the

BLACK box insert and the A&B are replaced with buttons depicting a wifi and telephone symbols.

(SEE Photos)

NB Whilst far too often "improvements" are largely motivated by increased profit, in this case, the

switch to the use of widely used Q series software is actually very beneficial as it now allows owners

helmets fitted with the later SRC system to pair to a far larger group of riders than the earlier SRC

system. The main downside is they require very different pairing procedures and that can confusing if

you own helmets containing both types of SRC collar.

HOW TO DO IT

The steps need to pair almost any headset/helmet to a TomTom Rider 2

Edition are basically the

same. So it makes sense to get the GPS ready to pair first - as follows:

(1) Turn on the TomTom Rider 2

Edition. Once at the home screen TAP the screen to enter the

menus.

(2) TAP "Change Preferences"

(3) TAP "Right arrow enough times to reach the "connect to headset" option.

(4) TAP "Connect to headset"

(5) IF THERE IS ANY OTHER HEADSET LISTED then CHOOSE "no" to force the TomTom Rider 2

Edition to enter the pairing process for a new headset

The next step is to determine which type of SRC collar is fitted to your Schuberth helmet to

make sure we follow the correct pairing process on the helmet collar.

OPTION A