TomTom RIDER Manual - Page 4

Browse online or download pdf Manual for GPS TomTom RIDER. TomTom RIDER 4 pages. How to pair 2nd edition to a schuberth src communication system
Also for TomTom RIDER: Install Manual (1 pages), Manual (44 pages)

Print Page

(7) It is a good idea to repeat this process whilst wearing the Schuberth helment to ensure

announcements are nice and clear. If they are muffled then you may need to adjust the speaker

placement within the helmet lining so they align with your ears.

(8) You may also want to adjust the volume on the Tomtom Rider 2

Edition to the maximum

loudness level – and then reduce the sound to a suitable level using the volume Up/Down buttons on

the SRC collar as needed. This will ensure that even when travelling very quickly you should be able

to clearly hear messages from the TomTom Rider 2

Edition or any audio inputs being routed via the

TomTom such as bluetooth Phone or MP3 inputs.

IF THE PAIRING FAILS...

OK it is possible that the pairing process may fail. In which case the important thing to stress is that

over time Schuberth/Scala have enhanced their equipment, via software updates to work with newer

equipment, made to newer bluetooth standards.

Sadly the software for the Rider 2

Edition remains pretty ancient meantime Schuberth/Scala have

actively released software updates to ensure the SRC system can communicate with newer

TOMTOM and Garmin GPS units. Unfortunately these update have resulted in some of the oldest

GPS bluetooth protocols being removed.

So if you encounter the ""the required features cannot be found" message, your first step should be to

completely reset the SRC to force it to revert to the original SRC software which should be recognised

by the Rider 2

Edition.

Please note this will clear ALL existing bluetooth links from the SRC so you may need to

subsequently pair any mobile phones or other bluetooth connections. BUT, when it comes to

connecting a TomTom Rider 2

Edition, ALWAYS sort out that connection first.

To reset a SRC which DOES NOT have A&B buttons – just start the SRC, when the blue lights are

flashing slowly press and hold the "+" (volume up) button for 5 seconds until red/blue flashing starts

Then press the "play music/telephone" button for 2 seconds until the LED flashes 5 times in Purple

and then the SRC will turn off. This will reset the SRC and when restarted it should be able to pair

with a TomTom Rider 2

Edition using the relevant process outlined above.

To reset a SRC which DOES have A&B buttons – just start the SRC, when the blue lights are flashing

slowly, press and hold down the "mobile phone" button for at least 6 seconds until the red/blue

flashing starts.

Then press the "volume up" button for 3 seconds until the red and blue LEDs blink 5 times and then

the SRC will turn off. This will reset the SRC and when restarted, it should be able to pair with a

TomTom Rider 2

Edition using the relevant process outlined above.