DIHL KA-SM-126 User Manual - Page 5

Browse online or download pdf User Manual for Mixer DIHL KA-SM-126. DIHL KA-SM-126 10 pages. Mini stand mixer

Print Page

Before First Use

Before assembling the mixer, remove and safely discard any packaging material. Wash the mixing bowl,

splash guard, beater, dough hook and whisk attachment in warm soapy water with a soft cloth. Rinse and dry

thoroughly.

Attaching the Mixing Bowl

Place one hand on top of the mixer head and with other hand downward rotation the tilt lever as per

the arrow showed to lift the mixer head up until it stops. Release the tilt lever. The mixer head will lock

into the elevated position. It is now easy to position the mixing bowl.

Fit the bowl so that it aligns with the grooves on the mixer stand.

To lock the mixing bowl, turn it clockwise following the

the mixing bowl is securely locked in place.

Attaching the Splash Guard

After lifting the mixer head, place the splash guard under the mixer head.

Align the

symbol on the mixer head with the

Turn the splash guard clockwise so that the

the splash guard.

Make sure the splash guard is securely locked in place.

Inserting Dough Hook/Beater/Whisk

After attaching the splash guard, align the chosen attachment so that the grooves on the attachment

align with the attachment shaft located under the mixer head.

With some pressure, push the attachment towards the mixer head, lifting the attachment shaft spring

upwards and twisting the attachment in an anti-clockwise direction. Make sure that the attachment is

securely locked in place.

NOTE: It is important that the dough hook, beater or whisk attachment is securely locked into place on the

attachment shaft or your stand mixer will not operate correctly.

Removing the Dough Hook/Beater/Whisk

Lift the mixer head, then hold on to the assembled attachment. With some pressure, push the

attachment towards the mixer head, lifting the attachment shaft spring upwards and twist the

attachment in a clockwise direction. Pull the attachment away from the attachment shaft to remove it

from the mixer head.

symbol on the mixer stand. Make sure that

symbol on the splash guard.

symbol on the mixer head aligns with the

symbol on