Epson TM-L90 series Development Manual - Page 31

Browse online or download pdf Development Manual for Printer Accessories Epson TM-L90 series. Epson TM-L90 series 34 pages. Attaching cover on the power switch
Also for Epson TM-L90 series: Brochure (1 pages), Brochure (2 pages), Product Manual (27 pages), Specifications (2 pages), Specifications (8 pages), Information Manual (5 pages), Specifications (4 pages), User Manual (40 pages), User Manual (17 pages), User Manual (21 pages), User Manual (21 pages), Manufacturing Manual (22 pages), Start Here (2 pages), Start Here (2 pages), Manual (13 pages), Instructions Manual (12 pages), User Manual (36 pages), Manual (2 pages)

Print Page

3.15 Automatic Recovery Function

The TM-L90 models feature a function for automatic recovery when the power is

turned on again after an interruption of power. Recovery processing is performed

automatically when the printer's power is turned on again after an interruption.

The recovery processing restores the printer to the condition it was in before the

power was turned off.

The TM-L90 models support outputting without flow control on the USB/Ethernet

interfaces.

The TM-L90 models support the MarkFeed function.

The OPOS_E_ILLEGAL / OPOS_EX_INVALIDMODE is returned at the execution

of the PTR_MF_TO_CURRENT_TOF under the condition that the label is at the

peel-off position or the position other than cut position in the case of the "TM-L 90

with Peeler" model.

However, the OutputCompleteEvent is fired upon the processing of the

transferred command during the asynchronous print since the label position

cannot be comprehended.

The label peeling detector may not be able to detect paper if the TM-L90 with

Peeler is installed in a place where the printer is exposed to direct sunlight or

other strong light.

If PTR_MF_TO_TAKEUP is executed, the label is fed to the peeling position and

OPOS_E_OFFLNE/OPOS_EPTR_REMOVE_BUTTON is returned.

In this case, remove the label and then press the FEED button of the printer.

APPLICATION DEVELOPMENT GUIDE

POSPrinter (TM-L90)

Version 3.00 Feb. 2019