Epson TM-L90 series Development Manual - Page 33

Browse online or download pdf Development Manual for Printer Accessories Epson TM-L90 series. Epson TM-L90 series 34 pages. Attaching cover on the power switch
Also for Epson TM-L90 series: Brochure (1 pages), Brochure (2 pages), Product Manual (27 pages), Specifications (2 pages), Specifications (8 pages), Information Manual (5 pages), Specifications (4 pages), User Manual (40 pages), User Manual (17 pages), User Manual (21 pages), User Manual (21 pages), Manufacturing Manual (22 pages), Start Here (2 pages), Start Here (2 pages), Manual (13 pages), Instructions Manual (12 pages), User Manual (36 pages), Manual (2 pages)

Print Page

3.19 Label Receipt Usage

Please specify the paper with the Memory Switch. To use the function related

to the label, the paper should be label paper or black mark paper.

When using label receipt paper, the Escape Sequence ESC|#IF feeds the

receipt the specified length, or to the head of the next label.

The TM-L90 models have a function to continuously cut paper and pull out its

head. First, the printer feeds the paper to the cutting position when this function is

used. Next, it cuts the paper using the specified cutting rate. Finally, it pulls out

the head of the paper and the operation ends. Because the printer pulls out the

head of paper after cutting it, the blank on the paper at the upper side can be

reduced. This function can be used only if the receipt paper is set to the paper

setting. This function can be used by the PTR_DI_CUT_AND_FEED_TOF

command of DirectIO. Though the cutting rate can be specified using the pData

parameter of DirectIO, for the TM-L90, the cutting rate does not change according

to the value of pData, because the cutting rate depends on the installed position

of the auto cutter unit. However, when values other than 0 to 100 are specified for

pData, OPOS_E_ILLEGAL (OPOS_EX_BADPARAM + 2) is returned.

APPLICATION DEVELOPMENT GUIDE

POSPrinter (TM-L90)

Version 3.00 Feb. 2019