Motorola CM160 User Manual - Page 16
Browse online or download pdf User Manual for Two-Way Radio Motorola CM160. Motorola CM160 46 pages. Commercial series controlhead
Also for Motorola CM160: User Manual (5 pages), Service Information (26 pages), Basic User's Manual (12 pages)
Print Page
Note: If your radio fails the self test routine the
display will show the failure number. Record
the number and consult your dealer
SELECTING A RADIO CHANNEL
Your radio offers up to 64 channels, however some
may not be programmed. Check with your dealer for
more information.
G
Press
to increment the Channel number
H
or
to decrement it.
Your radio will power up on a pre-programmed
designated channel or the channel that it was on
when it was powered down.
Home Revert Memory Channels (1&2)
Up to two programmable buttons can be
programmed as Home Revert Memory Channel
buttons which allow you quick access to frequently
used channels. The buttons may be pre-
programmed by your dealer or are programmable
by yourself.
If pre-programmed by your dealer, an appropriate
press of the button will take you to the assigned
channel.
English
14
Store Memory Channels (1&2)
To program a Memory Channel button yourself,
select the desired channel in the normal way and
long press the button. The button is then
programmed to the selected channel; a short press
on the button will take you to that channel.
Note: The programming is retained when you turn
off the radio.
Using the Microphone Keypad (If programmed)
Enter the desired channel number on the keypad.
Press # on the keypad to select the channel.
Note: The keypad microphone cannot be used to
enter the channel number during a call or
whilst the radio is in a scan.
Set Local or Distance Mode
Distance is the standard mode of operation, and
maximises receive radio range.
Local reduces interference from other radios in
close proximity and is typically used for base station
configurations.
Press the preprogrammed Local/Distance button to
toggle between Local and Distance mode.