Motorola CM160 Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для Двостороннє радіо Motorola CM160. Motorola CM160 46 сторінок. Commercial series controlhead
Також для Motorola CM160: Посібник користувача (5 сторінок), Сервісна інформація (26 сторінок), Базовий посібник користувача (12 сторінок)

Note: If your radio fails the self test routine the

display will show the failure number. Record

the number and consult your dealer

SELECTING A RADIO CHANNEL

Your radio offers up to 64 channels, however some

may not be programmed. Check with your dealer for

more information.

Press

to increment the Channel number

to decrement it.

Your radio will power up on a pre-programmed

designated channel or the channel that it was on

when it was powered down.

Home Revert Memory Channels (1&2)

Up to two programmable buttons can be

programmed as Home Revert Memory Channel

buttons which allow you quick access to frequently

used channels. The buttons may be pre-

programmed by your dealer or are programmable

by yourself.

If pre-programmed by your dealer, an appropriate

press of the button will take you to the assigned

channel.

English

Store Memory Channels (1&2)

To program a Memory Channel button yourself,

select the desired channel in the normal way and

long press the button. The button is then

programmed to the selected channel; a short press

on the button will take you to that channel.

Note: The programming is retained when you turn

off the radio.

Using the Microphone Keypad (If programmed)

Enter the desired channel number on the keypad.

Press # on the keypad to select the channel.

Note: The keypad microphone cannot be used to

enter the channel number during a call or

whilst the radio is in a scan.

Set Local or Distance Mode

Distance is the standard mode of operation, and

maximises receive radio range.

Local reduces interference from other radios in

close proximity and is typically used for base station

configurations.

Press the preprogrammed Local/Distance button to

toggle between Local and Distance mode.