Motorola MBP33SPU User Manual - Page 12
Browse online or download pdf User Manual for Baby Monitor Motorola MBP33SPU. Motorola MBP33SPU 28 pages.
Print Page
3. Using the Baby Monitor
3.1
Setting up
• Place the baby unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the baby unit's head angle by rotating the camera up, down, left and
right until you are satisfied with the image in the parent unit.
NOTE
Do not place the baby unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2
Night Vision Mode
The baby unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
parent unit will display in black and white. The
top of the screen.
3.3
Talk Mode
Press and hold the
the baby unit's loudspeaker. The
screen.
3.4
Video ON/OFF
V
Press
VIDEO ON/OFF key to turn the LCD display on or off, but still leave the
audio monitor on.
3.5
Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
12
T
TALK button on the parent unit to talk to your baby through
T
icon will be displayed at the top of the LCD
icon will be displayed at the
Using the Baby Monitor