Motorola MBP33SPU Kullanıcı Kılavuzu - Sayfa 12

Bebek Monitörü Motorola MBP33SPU için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola MBP33SPU 28 sayfaları.

3. Using the Baby Monitor

3.1

• Place the baby unit in a convenient location (e.g. on a table) and point the

camera lens towards the area you want to monitor.

• Adjust the baby unit's head angle by rotating the camera up, down, left and

right until you are satisfied with the image in the parent unit.

NOTE

Do not place the baby unit within the baby's reach! If there is interference with

the picture or sound, try moving the units to different locations, and ensure they

are not close to other electrical equipment.

3.2

The baby unit has 8 high-intensity infrared LEDs for picking up clear images in

the dark. When the built-in photo sensor on the top of the unit detects a low level

of ambient light, the LEDs will automatically activate and the screen on the

parent unit will display in black and white. The

top of the screen.

3.3

Press and hold the

the baby unit's loudspeaker. The

screen.

3.4

Press

VIDEO ON/OFF key to turn the LCD display on or off, but still leave the

audio monitor on.

3.5

Temperature Display (HH °C / °F or LL °C / °F)

The temperature reading from the temperature sensor at the back of the Baby

Unit will be displayed at the top of the LCD screen. The readings will turn RED if

the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will

change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading

will change to LL °C / °F if the temperature goes below 1°C / 34°F.

TALK button on the parent unit to talk to your baby through

icon will be displayed at the top of the LCD

icon will be displayed at the

Using the Baby Monitor