ARGSeguridad ZDAS-300 User Manual - Page 12

Browse online or download pdf User Manual for Security System ARGSeguridad ZDAS-300. ARGSeguridad ZDAS-300 16 pages. Luxury voiced lcd alarm system

Print Page

Press the key fob Dis-Arm will return the control panel back to normal status. Otherwise

the Walk Test will

Auto extinguish approximately 30 seconds after last test signal was

received.

3.6 Deleting Registered Key Fobs

Deleting Registered Key Fob: Press the DELETE key on the Keypad, a series of - - - will

appear on the LCD. Press the Disarm key on a current registered Key Fob or entering the

preprogrammed PIN code, and the word 'DEL Sensor' will appear on the LCD.Press '0' on the

numeric Key pad to select the Key Fob Zone and the LCD will display Zone 0, press the

registered No of the Key Fob you wish to delete. e.g. key fob No 2, the LCD will now display

Zone 0 2. Press DELETE key to delete No 2 Key Fob.

If no further actions take place the panel will automatically return to normal

state after approximately 30 seconds. Otherwise at the end, press the Dis-Arm key

on a registered Key Fob to return the panel to normal state.

3.7 Deleting Registered Sensors

Deleting Registered Sensors: Press the DEL key on the Keypad, a series of - - - will

appear on the LCD. Press the Disarm Key on a current registered Key Fob or entering the

preprogrammed PIN code, and the word 'DEL Sensor' will appear on the LCD. Press 1 to 8

on the numeric Keypad to select the Zone the detector to be deleted is allocated to. e.g. Zone

3 and the LCD will display Zone 3, press the registered No of the detector you wish to delete.

e.g. detector No 2, the LCD will now read Zone 3 2. Press Delete key to delete No 2 detector

in Zone 3.

If no further actions take place the panel will automatically return to normal state after

approximately 30 seconds. Otherwise at the end, press Dis-Arm key on a registered Key Fob

to return the panel to normal state.

3.8 The Zone Setting and Allocation

The alarm system has 8 zones which can be configured depending on your requirements.

The Factory Default Zone configuration settings are as follows:

No 1 Zone Fire;

No 3 zone: Entry/Exit ;

No 7 Zone Interior Intruder ；

No 2 Zone Panic ;

No 4 . 5 . 6 Zone Exterior Intruder;

No 8 zone Watchdog

If no further actions take place the panel will automatically return to normal state after

approximately 30 seconds. Otherwise at the end, press the Dis-Arm key on a registered Key

Fob to return the panel to normal state.

3.16 View detector's total in every zone

How To view the detector's total In a Zone: Press the Sensor key on the keypad, a series

of - - - will appear on the LCD. Press the Disarm key on any current registered Key Fob or

enter the preprogrammed PIN code, and the word 'DEL Sensor' will appear on the LCD.

Using the *and # keys scroll through the Zones and their registered detectors. e.g. If the

LCD displays: Zone 0 2 this means 2 key fobs are registered. If the LCD displays Zone 5 3

means 3 detectors are registered in the Zone 5 etc.

3.17 Speak and listen in

The function of speak and listen in: When the Panel alarms, the C.S operator or user

could access the speak and listen in function of the panel by pressing the corresponding

keys on the telephone keypad, then the user or operator could know what is going on within

the premise.(the MIC & SPEAK inside the panel)

3.18 record & playback the private voice

Function: When the panel alarms, it will auto dial the user telephone numbers After the

user press the * to confirm, he can listen to the recorded alarming message, which informs

the user what happens. The user can press 9 to replay the message.

How to record/play the message: In the disarmed status, press the OGM and hold it

for 2 seconds. The panel LCD will display COPY.At this time, you can record the alarming

message now. The recording time is 12 seconds. Press OGM, you can hear the recorded

message.

LOG