Motorola WHiSP SM User Manual - Page 6
Browse online or download pdf User Manual for Radio Motorola WHiSP SM. Motorola WHiSP SM 18 pages.
Print Page
D R A F T – 9/10/2001
In order to configure your WHiSP radio,
you must temporarily assign a fixed IP
address to your computer.
Click the radial "Specify an IP address" so
that a dot appears. Then you may enter a
temporary IP address and subnet mask.
Enter the IP address 192.168.100.4, and
subnet mask 255.255.255.0.
You may then click OK, and OK again to
the Network Properties dialog. Your
computer will copy some Windows install
files, and may ask for the Windows CD if
Windows install files (called CAB files)
were not copied to your hard drive at
installation time.
Your computer will typically indicate that
it needs to reboot before the settings take
effect. You will need to reboot before
proceeding to configure your WHiSP radio.
After configuring and alignment of your WHiSP radio, follow the service provider
instructions for returning your TCP/IP properties to "Obtain an IP address
automatically" or other "specific IP address" assigned value as instructed. Expect your
system to reinstall files (or ask for the Windows CD if CAB files are not copied on your
hard drive) and request reboot each time TCP/IP parameters are changed. You may
return your TCP/IP parameters to the specific temporary IP address at any time to review
or reconfigure your WHiSP radio.