Motorola WHiSP SM Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Rádio Motorola WHiSP SM. Motorola WHiSP SM 18 páginas.

D R A F T – 9/10/2001

In order to configure your WHiSP radio,

you must temporarily assign a fixed IP

address to your computer.

Click the radial "Specify an IP address" so

that a dot appears. Then you may enter a

temporary IP address and subnet mask.

Enter the IP address 192.168.100.4, and

subnet mask 255.255.255.0.

You may then click OK, and OK again to

the Network Properties dialog. Your

computer will copy some Windows install

files, and may ask for the Windows CD if

Windows install files (called CAB files)

were not copied to your hard drive at

installation time.

Your computer will typically indicate that

it needs to reboot before the settings take

effect. You will need to reboot before

proceeding to configure your WHiSP radio.

After configuring and alignment of your WHiSP radio, follow the service provider

instructions for returning your TCP/IP properties to "Obtain an IP address

automatically" or other "specific IP address" assigned value as instructed. Expect your

system to reinstall files (or ask for the Windows CD if CAB files are not copied on your

hard drive) and request reboot each time TCP/IP parameters are changed. You may

return your TCP/IP parameters to the specific temporary IP address at any time to review

or reconfigure your WHiSP radio.