Epson 7800 - Stylus Pro Color Inkjet Printer Unpacking And Setup Manual - Page 14

Browse online or download pdf Unpacking And Setup Manual for Software Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 pages. Stylus pro 800 series
Also for Epson 7800 - Stylus Pro Color Inkjet Printer: Brochure & Specs (8 pages), Specifications (4 pages), Getting Started Manual (10 pages), User Manual (11 pages), Quick Reference Manual (12 pages), Supplementary Manual (1 pages), Limited Warranty (12 pages), Brochure & Specs (8 pages), Product Support Bulletin (10 pages), Brochure & Specs (16 pages), Notice Sheet (4 pages)

Print Page

Accessories:

Base bolts (4)

Strut bolts (2)

Hex socket head bolts with washers (10)

Collars (2)

Wing screws (2)

Washers (2)

Assembling the Stand

Caution:

Assembly requires two people. Be careful to

match the right and left legs (R and L is engraved

on the inner side of the base parts) and base parts.

1. Insert the right leg into the right base by

sliding the leg slot onto the base projection as

shown. Use the hex wrench to fasten the leg to

the base with 2 base bolts (H).

2. Assemble the left leg and left base in the same

3. Insert the bottom horizontal strut into the

way as step 1.

right and left bases as shown. Use the hex

wrench (G) to fasten the strut with collars (K)

and strut bolts (I).

Note:

After assembling the bases and bottom horizontal

strut, make sure that they are fastened tightly.