Epson 7800 - Stylus Pro Color Inkjet Printer Unpacking And Setup Manual - Page 15

Browse online or download pdf Unpacking And Setup Manual for Software Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 pages. Stylus pro 800 series
Also for Epson 7800 - Stylus Pro Color Inkjet Printer: Brochure & Specs (8 pages), Specifications (4 pages), Getting Started Manual (10 pages), User Manual (11 pages), Quick Reference Manual (12 pages), Supplementary Manual (1 pages), Limited Warranty (12 pages), Brochure & Specs (8 pages), Product Support Bulletin (10 pages), Brochure & Specs (16 pages), Notice Sheet (4 pages)

Print Page

4. Insert the top horizontal strut into the right

and left legs. Use a screw driver to fasten the

strut with hex socket head bolts with washers

(J).

5. This completes assembly of the Stand. Make

sure each part of the Stand is tightened

securely.

Mounting the printer on the Stand

Caution:

Two or more people are required to mount the

printer. Hold the printer at the indicated

locations as shown. If the ink cartridges are

installed, do not tip the printer at an angle.

Otherwise, ink may leak from the cartridges.

1. Lock the two casters and extend the two

stabilizer knobs underneath the base unit.

Note:

Place the casters sideways and lock them so they

will not move.

2. Mount the printer on the printer mount as

shown.

3. Fasten the bottom of the printer and the

printer mount with wing screws (L) and

washers (M)

4. This completes the mounting procedure.

Make sure the printer and the Stand are

fastened together securely.