Epson FX-1180 - Impact Printer Quick Manual - Page 12

Browse online or download pdf Quick Manual for Software Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 pages. Epson serial impact dot matrix printers
Also for Epson FX-1180 - Impact Printer: Setup Manual (33 pages), Brochure & Specs (24 pages), Product Information (17 pages), Quick Reference Manual (16 pages), Manual (11 pages), Specification (2 pages), Manual (18 pages), Specifications (2 pages), Limited Warranty (1 pages), Reference Manual (34 pages)

Print Page

6. Remove the front cover by pushing it

straight down, as shown below.

7. Make sure your paper has a clean,

straight edge. Then open both sprocket

covers and fit the first four holes of the

paper, with printable side up, over the

tractor pins.

8. Close the sprocket covers.

9. Slide the right sprocket to remove any

slack in the paper; then lock it in place by

pushing the sprocket lock down.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

10. Attach the front cover with the

continuous paper positioned as shown

below.

11. Make sure the paper guide is lying flat

on the printer and the edge guides are

open all the way to the left and right.

Then raise the continuous paper

support.

12. Turn on the printer. When the printer

receives data, it automatically loads the

paper and starts printing.

If the first line on your page appears too high

or low, you can change its position by using

the Micro Adjust function as described in

"Micro Adjust Function."

Caution:

Never use the knob to adjust the

top-of-form position; this may damage the

printer or cause it to lose the top-of-form

position.

Continuous Paper with the Front Push Tractor (2/2)