Epson PowerLite 81p Lamp Replacement Update

Browse online or download pdf Lamp Replacement Update for Software Epson PowerLite 81p. Epson PowerLite 81p 2 pages. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Also for Epson PowerLite 81p: User Manual (42 pages), Specifications (2 pages), Operation Manual (47 pages), Quick Setup Manual (2 pages), Parts List (1 pages), Product Information (15 pages), Installation Manual (19 pages), Product Support Bulletin (25 pages), Product Support Bulletin (7 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages)

Print Page
Epson PowerLite 81p Lamp Replacement Update
Lamp Replacement Update
Please substitute the lamp replacement instructions below for the instructions in your Epson
®
PowerLite
61p/81p User's Guide:
1. Press the P
Power
unplug the power cord.
2. If the projector has been on, allow it to cool down for at least an hour (or until the lamp is cool).
Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to
avoid injury.
3. Use a screwdriver to loosen the screw holding the lamp cover. (The cover is on top of the
projector.)
4. Slide the cover out, then lift it off.
5.
6. Use the screwdriver to loosen the two screws holding the lamp in place. You can't remove them.
7.
button twice to turn off the projector. When the projector beeps twice,
®