Epson PowerLite 81p Lamp vervanging update

Blader online of download pdf Lamp vervanging update voor {categorie_naam} Epson PowerLite 81p. Epson PowerLite 81p 2 pagina's. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ook voor Epson PowerLite 81p: Gebruikershandleiding (42 pagina's), Specificaties (2 pagina's), Bedieningshandleiding (47 pagina's), Handleiding voor snelle installatie (2 pagina's), Onderdelenlijst (1 pagina's), Productinformatie (15 pagina's), Installatiehandleiding (19 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (7 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Lamp Replacement Update

Please substitute the lamp replacement instructions below for the instructions in your Epson

PowerLite

61p/81p User's Guide:

1. Press the P

Power

unplug the power cord.

2. If the projector has been on, allow it to cool down for at least an hour (or until the lamp is cool).

Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to

avoid injury.

3. Use a screwdriver to loosen the screw holding the lamp cover. (The cover is on top of the

projector.)

4. Slide the cover out, then lift it off.

6. Use the screwdriver to loosen the two screws holding the lamp in place. You can't remove them.

button twice to turn off the projector. When the projector beeps twice,