Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Setup Manual - Page 10

Browse online or download pdf Setup Manual for Software Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 16 pages. Warranty statement
Also for Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Specification Sheet (6 pages), Getting Started (13 pages), Brochure & Specs (6 pages), Quick Reference Manual (12 pages), Network Manual (46 pages), Installation Manual (4 pages), Product Information Manual (16 pages), Limited Warranty (12 pages)

Print Page

11. Extend the paper tray and the paper tray cover

according to the paper length to be used for

printing.

12. Press the Paper Source

Auto Cut On

on the LCD panel.

Caution:

Do not leave the paper in the printer for a long

period of time; its quality will deteriorate. We

recommend that you remove the paper from the

printer after printing.

button to select Roll

Loading Cut-Sheet Paper

To load cut-sheet paper in the paper tray, follow

the steps below.

Note:

This section describes loading cut-sheet paper smaller

than A3 size. If you want to load A3 or a larger paper,

or if you want to know the details of paper handling, see

"Paper Handling" in the User's Guide included on the

Printer Software CD-ROM shipped with your printer.

1. Make sure the printer is on and in the READY

state.

2. Press the Paper Source

Sheet

on the LCD panel.

3. Lift up the paper tray cover, and then pull the

paper guide roller up.

4. Raise the paper guide, and then slide the edge

guide to the left slightly wider than the width

of your paper.

button to select