Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Setup Manual - Page 12

Browse online or download pdf Setup Manual for Software Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 16 pages. Warranty statement
Also for Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Specification Sheet (6 pages), Getting Started (13 pages), Brochure & Specs (6 pages), Quick Reference Manual (12 pages), Network Manual (46 pages), Installation Manual (4 pages), Product Information Manual (16 pages), Limited Warranty (12 pages)

Print Page

8. Adjust the length of the paper guide and the

edge guide according to the paper size.

9. Put the paper guide roller down, and then

re-attach the paper tray cover.

Note:

Make sure the roll paper support is not raised.

Loading paper into the rear manual

feed slot

Note:

❏ You can load one sheet at a time into the rear feed

slot.

❏ Load paper with the printable surface up.

❏ Paper with a thickness between 0.08 and 1.6 mm

can be set in the landscape position. However,

always set recycled or plain paper and A4, Letter

size, or 8 × 10 in. paper in the portrait position,

regardless of the thickness.

1. Make sure the printer is on and in the READY

state.

2. Press the Paper Source

Sheet

on the LCD panel.

3. Hold the left and right edges of the paper.

Align the left edge of the paper with the target

paper size on the roll paper cover, and then

insert the paper until it meets resistance.

The printer automatically feeds the paper to

the printing position.

Note:

If you press the Pause button, the printer starts to

feed the paper to the printing position immediately.

button to select