Philips AZ 2045 User Manual - Page 11

Browse online or download pdf User Manual for Stereo System Philips AZ 2045. Philips AZ 2045 15 pages. Cd soundmachine
Also for Philips AZ 2045: User Manual (9 pages), Specifications (2 pages), User Manual (12 pages), Manual (8 pages), Service Manual (34 pages), Manual (10 pages), (Swedish) Snabbmanual (8 pages)

Print Page

DIGITAL TUNER

3 Press and hold ∞ or § until the frequency in the

display starts running.

™ The radio automatically tunes to a station of

sufficient reception. Display shows

during automatic tuning.

™ If a FM station is received in stereo,

shown.

4 Repeat steps 2-3 if necessary until you find the

desired station.

• To tune to a weak station, press ∞ or § briefly

and repeatedly until you have found optimal

reception.

To improve radio reception:

• For FM, extend, incline and turn the telescopic

antenna. Reduce its length if the signal is too

strong.

• For AM, the set uses a built-in antenna. Direct this

antenna by turning the whole set.

Programming radio stations

You can store up to a total of 30 radio stations in the

memory, manually or automatically (Autostore).

Manual programming

1 Tune to your desired station (see Tuning to radio

stations).

2 Press PROG to activate programming.

3 Press PRESET DOWN/ UP once or more to select

a preset number.

4 Press PROG to confirm.

5 Repeat steps 1-4 to store other stations.

Note: You can erase a preset station by storing

another frequency in its place.

Autostore

Autostore automatically starts programming radio

stations from preset 1. Available stations are

programmed in order of waveband reception strength:

FM, followed by AM. Any previous presets e.g.

manually programmed will be erased.

• Press PROG for 4 seconds or more to activate

autostore programming.

™ The display shows

followed by the radio station details when

stored. (See 5)

, program blinks,

AUTO

After all stations are stored, the first autostore preset

station will then automatically play.

To listen to a preset or autostore station

Press the PRESET (up or down) buttons once or more

until the desired preset station is displayed.

Changing tuning grid (some versions only)

In North and South America the frequency step

between adjacent channels in the AM and FM band

are 10 KHz and 100 KHz respectively. In the rest of the

world this step is 9 KHz and 50 KHz. Usually the

frequency step has been preset in the factory for your

area.

1 Check that the set is completely switched off.

2 To select 9KHz: Simultaneously, press MODE and

PRESET DOWN on the set.

3 Switch the set on to TUNER and then release the

controls.

• To select 10KHz: Repeat steps 1-3 but in step 2,

simultaneously, press MODE and PRESET UP on

the set.

™ When you tune to radio stations, the display

shows tuning in either steps of 9 kHz or 10 kHz.

™ All preset and autostore stations will be

affected and you may need to reprogram

stations.

CD PLAYER

Playing a CD

This CD player plays Audio Discs including

CD-Recordables and CD-Rewritables.

1 Press y to on, then SOURCE to select

™

2 Insert a CD with the printed side facing up and

close the CD door.

™ Display: total number of tracks and playing time.

™

non-finalized CD-R(W).

if no CD is inserted.

is shown if you have inserted a