Toshiba TDP-T250U Owner's Manual - Page 23

Browse online or download pdf Owner's Manual for Projector Toshiba TDP-T250U. Toshiba TDP-T250U 31 pages. Tdp-t250u user's guide

Print Page

Using the menus (Continued)

■ The default setting menu

This menu shows placement status and other settings.

Item

Projection

Sets projection mode in accordance with Placement Style.

mode

(Standard)

Blackboard

When projecting on a non-screen surface, select a color in accordance

mode

with the projecting surface.

Press

. Switch with

No signal

Set the time to wait for the power to be turned off after signal input

power off

stops or the last operation.

Press

. Switch with

Off (not turned off)/1 min./5 min./10 min./30 min./60 min.

Auto input

Set whether the input with signals is only selected or not.

Power on

Sets whether to turn on the power when the ON/STANDBY button is pressed

(Manual), or when the power cord is plugged in (Auto). Manual

Lamp power

Sets the lamp power.

Fan mode

Sets the cooling fan speed.

Remote control

When two or more projectors are used and controlled by the remote

code

control respectively, this menu sets the code for the projector and the

remote control.

[

:Enter setting mode]

from 1, 2, 3, 4]

[

Press [Cancel] to return.

Key lock

Lock the control panel buttons.

[

:Enter setting mode]

On/Off]

[

:Confirm]

Press [Cancel] to return.

Reset all

Press

Resets all adjustments and settings to their factory settings.

Password

Password function

p.36

When [Password] is [On], the Password Setting screen is displayed.

Detailed description

[Blackboard mode]

Projects the image in colors more like projecting on a screen.

Precaution

The projected image may differ depending on the type, color, and material of the

blackboard and wall even if the selected color is the same as the projected screen.

Description

p.22

(Mounted

(Rear mounted

(Rear)

from ceiling)

and

. Off/Green/Black/Brown/Blue/Beige

and

Low

Standard

[

: Select item]

[

: Select

:Confirm]

[

:Select OK to end]

[

: Select item]

[

: Select

[

:Select OK to end]

Yes

[Auto input Search]

[On]: Automatically searches the signals that

can be projected, and switches input

from the connected device that outputs

the signals each time the INPUT button

is pressed. The input from the connected

device that outputs no signals is skipped.

[Off]: Displays the Switch input menu.

Toggle with

button (The input without signals can be

selected.)

[Power on]

Note that if [Power on] is set to [Auto], then if the main power switch is ON when

Off

power is restored after a power outage, the projector will come on.

[Lamp power]

Auto

When [Lamp power] is set to [Low], the screen becomes a little darker, but the

cooling fan noise gets quieter.

[Fan mode]

High

Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to

use the projector, for example, at high altitude (over 1,500 meters above sea level).

[Remote control code]

Sets a remote control code from 4 types. You can set each code respectively for up

to 4 projectors. The factory setting is [1].

To switch codes, set the same code for the projector and the remote control.

A remote control code is applied after the setting is done.

• You cannot operate the remote control if the codes of the projector and the

remote control do not match.

Remote control code setting for remote control

Remove the battery cover and set the same remote control code switch as the

projector.

p.16

(Use a screwdriver with thin tip to set.)

Off

[Key lock]

Protect from operating errors by locking on the control panel buttons of the

projector.

(The remote control operations are available.)

Control panel operations are locked after the setting is done.

• To release the key lock, press the control panel's RETURN button for 10 seconds.

The key lock is released with a beep sound.

Switch input menu

Switch input

Computer (1) (digital)

Y/P

(1) (digital)

Computer (1) (analog)

Y/P

(1) (analog)

Computer (2)

Y/P

(2)

Computer (3)

buttons and press

Y/P

(3)

Video

S-video

shows whether signal is

input or not.