Toshiba TDP-T250U Owner's Manual - Page 22

Browse online or download pdf Owner's Manual for Projector Toshiba TDP-T250U. Toshiba TDP-T250U 31 pages. Tdp-t250u user's guide

Print Page

Using the menus (Continued)

[Background]

• TOSHIBA is set for [Logo] by factory setting.

• If user's logo has been registered, it is displayed when [Logo] is set for

background.

[Start-up screen]

If user's logo has been registered and this setting is [On], the logo is displayed at

start-up.

[User logo]

Registers a part of the image that is input from computer and displays it as a logo

at start-up and when no signal is input.

Select [User logo] in the Display setting menu, and press the

button.

Select <Register user logo> from the displayed menu list and press

the

button.

The register confirmation screen appears. Select [OK] or [Cancel] and

press the

button.

The image quality mode selection screen appears. Select [Normal] or

[Compressed] mode and press the

[Normal]:

Higher quality, though more time-consuming to register or display

the image

[Compressed]: Slight quality degradation, but less time-consuming to register or

display the image

Registration starts.

• A message is displayed while registration is in process.

Notes

• You can register a logo from computer input only.

• You cannot register a whole image.

• Only one logo can be registered. When a new image is registered, the old one is

erased.

• The time needed to register or display the image varies depending on the data size.

• If you use this function on commercial video software, broadcast or cable-

broadcasting except for the purpose of your private viewing and listening, it may

infringe the copyright protected by the copyright laws.

button.

Select the size of the registered logo (except during the PIP and SPLIT modes).

[icon]: Displays the registered image in original size at center of the screen.

アイコン後送

[icon]: Displays the registered image by enlarging fully in the screen.

(As processed digitally, the image quality is degraded.)

Sets background color when [Center] is selected for the logo display mode.

You can preview the registered logo.

You can reset the registered logo to the factory setting. (The logo set for the start-up

screen and background is reset.)